Composite materials in reinforcement of reinforced concrete structures: types, properties, production methods

DOI: 10.37153/2618-9283-2022-4-47-57

Authors:  
Rubric:     Theoretical and experimental studies   
Key words: composite reinforcement, damage, deformation, reinforcement, construction
Annotation:

The article is devoted to the actual problem of modern construction - the problem of strengthening reinforced concrete structures.

 The purpose of the study: study, analysis, generalization and systematization of disparate scientific information on the issue of strengthening reinforced concrete structures with composite materials.

Materials and methods: the article analyzes the characteristics of various composites used in the reinforcement of load-bearing reinforced concrete structures. In the process of work, such research methods as analysis, classification and comparison were applied. The scientific novelty of the study lies in the search, generalization and systematization of disparate information on the subject of the work.

Conclusion: the method of reinforcing reinforced concrete structures with materials based on carbon composites is the most effective way to restore the bearing capacity of building elements.

Used Books:

Rimshin V.I., Merkulov S.I. Elements of the theory of development of concrete structures with non-metallic composite reinforcement. Industrial and civil engineering. 2015, no. 5, pp. 38 – 42 [In Russian]

      2. Bondarenko V.M., Rimshin V.I. Dissipative theory of force resistance of iron-concrete Moscow, 2015, 111 p. [In Russian]

      3. Rimshin V.I. Damages and methods of calculation of reinforcement of reinforced concrete structures. Dissertation for the degree of Doctor of Technical Sciences. Moscow, 2001              [In Russian]

   4. Bondarenko V.M., Rimshin V.I. Quasi-linear equations of force resistance and diagram σ - ε of concrete. Structural mechanics of engineering constructions and buildings. 2014, no. 6, pp. 40 – 44 [In Russian]

     5. Bondarenko V.M., Rimshin V.I. Residual resource of force resistance of damaged reinforced concrete. Bulletin of the Department of Construction Sciences of the Russian Academy of Architecture and Construction Sciences. 2005, no. 9, p. 119 [In Russian]

    6. Bondarenko V.M., Borovskikh A.V., Markov S.V., Rimshin V.I. Elements of the theory of reinforced concrete reconstruction Moscow, 2002 [In Russian]

    7. Rimshin V.I., Merkulov S.I. On the normalization of the characteristics of rod nonmetallic composite reinforcement. Industrial and civil construction. 2016, no. 5, pp. 22–26 [In Russian]

8. Mosakov B.S., Kurbatov V.L., Rimshin V.I. Fundamentals of technological mechanics of heavy concrete. Mineralnye Vody, 2017, 210 p. [In Russian]

     9. Rimshin V.I., Kustikova Yu.O. Theoretical foundations for calculating the adhesion of glass-basalt-plastic reinforcement with concrete. Izvestiya Oryol State Technical University. Series: Construction and Transport. 2009, no. 2–22, pp. 29–33 [In Russian]

10. Rimshin V.I., Bikbov R.H., Kustikova Yu.O. Some elements of reinforcement of building structures with composite materials. Bulletin of Belgorod State Technological University named after V.G. Shukhov. 2005, no. 10, pp. 381–383 [In Russian]

   11. Varlamov A.A., Rimshin V.I. Models of concrete behavior. General theory of degradation for students of engineering and construction faculties receiving education in the field of preparation 08.03.01 "Construction". Moscow, 2019. Ser. Scientific thought, 436 p. [In Russian]

12. Inspection and testing of buildings and structures. Moscow, 2013, 669 p.

13. Kurbatov V.L., Rimshin V.I., Shumilova E.Yu., Daironas M.V. Technological processes in construction. Textbook. Moscow, 2020, 601 p. [In Russian]

    14. Technical operation of residential buildings. Moscow, 2012, .639 p.

   15. Telichenko V., Rimshin V., Eremeev V., Kurbatov V. Mathematical modeling of groundwaters pressure distribution in the underground structures by cylindrical form zone. MATEC Web of Conferences. 2018, 02025 [In Russian]

16. Karpenko N.I., Erishev V.A., Rimshin V.I. The limiting values of moments and deformations ratio in strength calculations using specified material diagrams. IOP Conference Series: Materials Science and Engineering. Vladivostok, 2018, 032024 [In Russian]    

   17. Rimshin V.I., Labudin B.V., Melekhov V.I., Orlov A., Kurbatov V.L. Improvement of strength and stiffness of components of main struts with foundation in wooden frame buildings. ARPN Journal of Engineering and Applied Sciences. 2018, Т. 13, no. 11, 3851-3856 [In English]          

18. Telichenko V.I., Rimshin V.I., Karelskii A.V., Labudin B.V., Kurbatov V.L. Strengthening technology of timber trusses by patch plates with toothed-plate connectors. Journal of Industrial Pollution Control. 2017, Т. 33, no.1, 1034–1041 [In English]

   19. Kuzina E., Rimshin V. Deformation monitoring of road transport structures and facilities using engineering and geodetic techniques. International Scientific Conference Energy Management of Municipal Transportation Facilities and Transport EMMFT 2017. Conference proceedings. Advances in Intelligent Systems and Computing. Cham, 2018, pp. 410–416 [In English]